Picking a floor is not just about color. It is about how you use the space, how much abuse it will take, and how easy you want life to be after install. At Elite Coating we build floors that last, look sharp, and make day to day work easier. This guide breaks down the three most requested options for concrete coating so you can choose with confidence.
Flake Epoxy: the everyday workhorse
If you want a clean shop or garage you can hose down and forget about, flake epoxy is the move. We broadcast color chips into a high build coating and lock it in with a clear topcoat.
Why people pick it
-
Hides dust, dirt, and small imperfections
-
Great traction with a light orange peel texture
-
Fast return to service with our quick cure systems
-
Wide color range that matches cabinets and walls
Best for garages, home shops, storage rooms, mudrooms, dog rooms, light commercial
Care sweep, mop, mild cleaner, no special wax
Metallic Epoxy: the showpiece
Metallic systems are poured and moved by hand to create depth and motion. Every floor is one of one. If you want a lobby, bar, or showroom that turns heads, this is it.
Why people pick it
-
Deep, fluid looks that you cannot get with tile or paint
-
Seamless surface over large areas
-
Can add subtle traction and a satin or gloss finish
Best for showrooms, offices, home entries, basements, retail
Care dust mop, neutral cleaner, occasional light buff depending on finish
Polished Concrete: lean and low maintenance
Polished concrete is not a coating. We refine the slab with grinders and densifiers, then seal it. It looks clean, reflects light, and holds up in busy spaces.
Why people pick it
-
Very low maintenance
-
No film to scratch off
-
Modern, minimal look
Best for warehouses, studios, large shops, modern residential
Care dust mop, auto scrub with neutral cleaner
Prep Makes the Floor
Floors fail from the bottom up. We do not skip prep.
-
Moisture check to spot vapor issues before coating
-
Mechanical grind to open the slab and remove weak material
-
Crack and pit repair so the finish lays flat
-
Profile matched to system so the build locks in
How We Build the System
Different spaces need different stacks, but most concrete coating projects follow a pattern.
-
Primer for bond and moisture tolerance where needed
-
Body coat for build and strength
-
Broadcast full chip for flake or pigment flow for metallic
-
Topcoat for chemical and scratch resistance, gloss or satin
We also offer polyaspartic options for fast turn projects and UV stability in sun-exposed areas.
Timeline and Downtime
-
1 car garage often in a day with quick cure systems
-
2 to 3 car garages usually 1 to 2 days
-
Metallic and large commercial projects vary by size and detail
We set clear timelines before we start so you can plan around the work.
Cost Drivers to Know
-
Square footage and layout
-
Condition of the slab and amount of repair
-
System build and topcoat type
-
Design choices like custom colors, logos, flakes, and borders
We quote in writing and you see every line.
Safety and Slip
You control traction. We can leave a smooth satin finish for easy mopping or add fine traction for wet areas. We match grip to the space so you feel stable without a sandpaper look.
Hot Tire Pickup and Chemicals
Our systems are designed to resist hot tire lift, road salts, oils, and household chemicals. For heavy chemical duty we spec higher solids and special topcoats. We will ask how you use the space and build to that use.
Why Elite Coating
-
Proven surface prep and moisture testing
-
Quality materials from trusted suppliers
-
Clean edges, straight cut lines, and tight schedules
-
Local team that answers the phone and stands behind the work
Ready to Pick a Floor?
Send us a few photos and the size of your space. Tell us how you use it. We will recommend the right concrete coating system, price it, and give you a clear timeline. If you want, we can also match colors to your cabinets, vehicles, or brand. Call us today at +1 346-597-3291.
