Bay-adjacent coatings for San Leon homes on Galveston Bay.
San Leon is an unincorporated waterfront community on Galveston Bay between Kemah and Bolivar with a mix of fishing-camp originals and newer residential builds. Elite Coatings handles coastal-rated installs for San Leon properties.
Coating systems for San Leon homes and commercial spaces.
San Leon sits directly on Galveston Bay’s western shore with residential slabs that range from fishing-camp era pours to current new construction. The moisture environment here is comparable to Kemah and Shoreacres: bay humidity, elevated vapor readings, and salt-air penetration on older slabs.
Flake Epoxy for Garages+
Chip-broadcast flake epoxy is the most-requested residential system we install in San Leon. It hides surface pitting and hairline cracks, resists tire marks and oil staining, and gives garages a clean professional look with slip-resistant texture. Starts around $6 per square foot with full diamond grinding, a moisture barrier when the slab requires it, and a commercial-grade polyaspartic topcoat. Full flake system details here.
Metallic Epoxy Showroom Floors+
Metallic epoxy is our premium residential and commercial finish. No two floors look the same: the metallic pigments move and pool differently on every slab, creating a one-of-a-kind result. Good fit for San Leon showrooms, luxury garages, restaurants, and retail. Starts around $10 per square foot. Metallic epoxy details here.
Polished Concrete+
Diamond-ground, densified, and burnished concrete that turns the slab itself into the finish floor. No topcoat to peel. Life-of-building durability when the substrate is right. Good fit for San Leon warehouses, retail, restaurants, offices, and modern residential. Starts around $5 per square foot. Polished concrete details here.
Patio & Exterior Coatings+
UV-stable polyaspartic and exterior specialty systems for San Leon patios, pool decks, driveways, and covered outdoor areas. Purpose-built for Texas sun and Houston humidity. Interior epoxy outside will chalk and peel within a season. We won’t install that at an exterior site. Exterior concrete details here.
Solid Color Epoxy+
Clean, flat finish for San Leon garages, workshops, and utility rooms. Chemical durability, easy to maintain, visually tidy. Good choice for commercial and industrial spaces that want a professional look without the texture variation of flake. Solid color details here.
Stained Concrete+
Natural organic color directly on the existing slab. Acid or water-based stain, sealed with UV-stable topcoat. Good fit for San Leon homeowners who want to keep the concrete character rather than cover it with epoxy. Stained concrete details here.
Prep is 80% of the job.
Older San Leon slabs near the water often have significant surface carbonation and sometimes previous paint or sealer layers that need to be removed. We factor the extra prep into the scope at quote time rather than discovering it on install day.
San Leon patios and covered outdoor areas require UV-stable exterior systems, slip-resistant aggregate, and in many cases a moisture barrier as part of the base. The bay environment is not forgiving of shortcuts on any of these requirements.
What San Leon homeowners say.
“Justin walked my slab before he gave me a number. Found a moisture issue the other guy didn’t mention. Glad I went with Elite. The floor held through a full Texas summer without a single issue.”
Marcus T. · San Leon · Flake garage“Quoted me honestly, showed up on time, did the prep properly, and the result looks better than the photos on the website. No sales games. Straight shooter.”
Rachel H. · San Leon“Patio coating looks brand new two years in. No chalking, no peeling. I’ve had compliments from guests who thought we replaced the concrete.”
Dave W. · San Leon“They told me one of my slabs wasn’t a good candidate until I got a crack repaired. I appreciated the honesty. Came back after the repair and installed a metallic floor that gets comments every time someone sees the garage.”
Karen L. · San Leon, TX“Commercial floor in our San Leon shop. They handled the square footage efficiently, stayed on schedule, and the floor has held up to daily forklift traffic. Same price they quoted.”
Steve R. · San Leon · Polished concreteSan Leon, TX and surrounding neighborhoods.
Questions we hear from San Leon homeowners.
Do you handle older fishing-camp era slabs in San Leon?
Yes. Older slabs in San Leon are some of the most challenging prep stories in our service area: salt air penetration, multiple paint layers, surface carbonation, and hairline crack networks from decades of coastal movement. We walk these slabs carefully, scope the prep honestly, and price the system that will actually hold in the environment.
What does epoxy prep look like in San Leon?
Every install starts with diamond grinding to open the concrete surface to CSP 3-4 profile. We run a calcium-chloride moisture test, route and fill any cracks, and apply a moisture barrier when the test reading calls for it. Prep is typically half or more of the total install time. Skipping it is the primary reason coatings fail.
How much does a San Leon garage floor cost?
Flake and solid color epoxy start around $6 per square foot. Metallic epoxy starts around $10 per square foot. Polished concrete starts around $5 per square foot. Every price includes full prep, moisture treatment when needed, and a commercial-grade topcoat. We quote in writing with the scope itemized so there are no add-ons on install day.
Do you offer free quotes in San Leon?
Yes. Justin or a member of the team walks the slab, runs a moisture test, documents any repairs needed, and gives you a written scope and price. No high-pressure tactics. If the slab isn’t a good candidate for coating, we’ll tell you that before you commit to anything.
How long does a San Leon install take?
Most residential garage installs run one to two days. Foot traffic at 24 hours, vehicle traffic at 72 hours. Larger commercial installs are scoped individually. Older slabs with more prep work take longer and we price that into the scope at quote time.
What neighborhoods do you cover in San Leon?
We cover all of San Leon: Repsdorph Road, Bayshore Drive, Galveston Bay shoreline. No travel surcharges within our service area.
Can I see examples of your work near San Leon?
Yes. Browse our full gallery for flake garages, metallic showroom floors, patio coatings, and polished concrete installs across the Houston metro and Galveston County. We can also send references from installs near San Leon when you schedule your quote walkthrough.
San Leon garage or patio? Let us walk it.
Substrate read, moisture test, and a written scope. If your slab is not ready, we tell you that first. No sales pitch.